Need something exceptional to stand out from the crowd? Something very different to create a powerful signature effect. Lack that missing X factor? Then go to the extreme with the visually sensational Robe TetraX! Developed from the immensely successful Robe Tetra1, the Robe TetraX adds dynamic pan movement with extremely high-speed continuous rotation, dramatically increasing sweeping effect possibilities of the fixture.
Generating an ultra-tight 4° beam from each of the 9 evenly spaced pixels, they combine to produce a bright, defined “sheet” of light, as desired by Lighting Designers. The homogenized beams and smooth 11:1 motorized zoom provide ultra-smooth washes out to 45°. Robe TetraX sets itself apart by including three exclusive eye-catching Robe patented MCFE – Multi-Colored Flower Effect – emitting sharp, multi-colored spikes of light, with variable speed and rotation direction control, to further increase the projection of charismatic in-air animations.
All-inclusive color and dimming control are available via RGBW and CMY color mixing modes; variable CCT of 2.700K – 8.000K; tungsten emulation simulating the red shift and thermal delay of tungsten lamps for whites from 2.700K – 4.200K; DataSwatch 237 pre-programmed color library; L3 Low Light Linearity dimming software for imperceptible fades to black.

TECH SPECS

The Robe TetraX sports the following features:

SOURCE

  • Light source type: 9x 40W RGBW LED multichips
  • LED life expectancy: min. 50.000 hours
  • Typical lumen maintenance: L70/B50 @ 50.000 hours

OPTICAL

  • Robe’s proprietary optical design
  • Zoom range: 4°- 45°
  • Highly efficient component optics
  • Fixture total lumen output:
    • 5.300 lm (integrating sphere)
    • 4.225 lm (goniophotometer)

DYNAMIC EFFECTS

  • Color mixing mode RGBW or CMY
  • Individual control of each RGBW pixel
  • Variable CCT: 2.700K – 8.000K
  • Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
  • DataSwatch filters: pre-programmed 237 colors and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
  • Pre-programmed pixel effects with color, dimming and strobe chases, waves and pulses at variable speed and direction
  • 3x MCFE – Multi-Colored Flower Effects – creating spectacular multi-color beam effects in the air rotating in both directions at variable speed (Patented)
  • Motorized zoom
  • Pre-programmed random strobe & pulse effects
  • Electronic strobe effect with variable speed up to 20 Hz
  • High resolution electronic dimming: 0 – 100%
  • L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

CONTROL

  • Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
  • Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
  • REAP™ – Robe Ethernet Access Portal
  • Wireless CRMX technology from Lumen Radio – on request
  • Epass: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity
  • DMX Protocol modes: 6
  • Control channels: 41, 61, 75, 84, 88, 97
  • RGBW / CMY: 8 or 16 bit
  • Zoom: 8 or 16 bit
  • Dimmer: 8 or 16 bit (internal 18 bit)

MOVEMENT

  • Pan movement range 540° with continuous rotation control
  • Tilt movement: 191°
  • 16 bit movement resolution
  • Controllable speed of Pan/Tilt movement

THERMAL

  • Maximum ambient temperature: 40°C (104°F)
  • Maximum surface temperature: 70°C (158°F)
  • Minimum operating temperature: -5°C (23°F)
  • Total heat dissipation: max. 818 BTU/h (calculated)

ELECTRICAL

  • Power supply: Electronic auto-ranging
  • Input voltage range: 100-240 V, 50/60 Hz
  • Power consumption: max. 320 W
  • Power connector in/out: Neutrik powerCON TRUE1 in/out
  • DMX and RDM data in/out: Locking 5-pin XLR
  • Ethernet port in/out: RJ45 for Embedded Epass switch 10/100 Mbps

DIMENSIONS

  • Height: 368 mm (14.48”)
  • Width: 512 mm (20.15”)
  • Depth: 205 mm (8.07″) – head in horizontal position
  • Weight: 15.7 kg (34.6 lbs)
  • Ingress protection rating: IP20

Robe TetraX available for rental. Contact us for pricing!

Robe TetraX  1024×1024

Contact Us