Robe Spiider

TECH SPECS

VERSION:

3.3

The Robe Spiider sports the following features:

Color mixing mode RGBW or CMY
Individual control of each RGBW pixel
Variable CTO: 2.700K – 8,000K
Virtual Color Wheel: with 66 preset swatches
Tungsten lamp effect at whites: 750W, 1,000W, 1,200W, 2,000W, 2,500W lamp emulation for whites from 2,700K to 4,200K (red shift and thermal delay)
Color rainbow effect with variable speed
Pre-programmed pixel effects with color, dimming and strobe chases, waves and pulses at variable speed and direction
MCFE – Multi-Colored Flower Effects – creating spectacular multi-color beam effects in the air rotating in both directions at variable speed (patented)
Strobe effect: variable speed (max. 20 flashes per second)
Pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 – 100%
L3 – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

SOURCE

Light source type: 1x 60W RGBW and 18x 40W RGBW LED multichips
LED life expectancy: min. 50,000 hours

OPTICAL

High – efficiency zoom optical system, ratio 12,5:1
Zoom range: 4° – 50°
Fixture total lumen output: 13,700 lm (integrating sphere) / 11,000 lm (goniophotometer)
Illuminance: 50,100 lx @ 5 m

CONTROL

  • Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
  • Wireless CRMX technology from Lumen Radio – on request
  • DMX Protocol modes: 10
  • Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123
  • Pan/Tilt resolution: 16 bit
  • R,G,B,W color mixing: 8 or 16 bit (internal 18 bit)
  • Zoom: 8 bit
  • Dimmer: 8 or 16 bit (internal 18 bit)

MOVEMENT

  • Pan movement: 540°
  • Tilt movement: 220°
  • Movement control: Standard and Speed
  • Controllable speed of Pan/Tilt movement
  • EMS: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration
  • Automatic Pan/Tilt position correction

CONNECTIONS

  • Power in connector: Neutric powerCON TRUE1
  • DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
  • Ethernet port in/out: RJ45
  • Embedded Ethernet switch 10/100 Mbps: 1 x in / 1 x out

THERMAL

  • Maximum ambient temperature: 45 °C (113 °F)
  • Maximum surface temperature: 75 °C (167 °F)
  • Minimal operating temperature: – 5°C (23 °F)

ELECTRICAL

  • Power supply: Electronic auto-ranging
  • Input voltage range: 100-240 V, 50/60 Hz
  • Power consumption: max. 600 W

DIMENSIONS

  • Height: 477 mm (18.7”)
  • Width: 390 mm (15.3”)
  • Depth: 252 mm (9.9”)
  • Weight: 13.3kg (29.2 lbs)

CERTIFICATIONS

  • Ingress protection rating: IP20

Robe Spiider available for rental. Contact us for pricing!

Robe Spiider: Multi-Source RGBW LED WashBeam with Pixel Control and Flower Effect

Nineteen LED sources in one fixture, and every one of them independently controllable. The Spiider runs 18 x 40W RGBW multichip LEDs for the wash output and one 60W RGBW LED at the center, all through a high-efficiency 12.5:1 zoom optical system that covers 4 to 50 degrees. The result is a fixture that works as a tight aerial beam, a wide soft wash, a pixel-mapped canvas, or all three in the same show depending on what the cue calls for.

Robe‘s lens coating technology keeps the optics clear and scratch-resistant over the long haul, and the L3 Low Light Linearity system produces 18-bit smooth fades to black that hold up under camera. At 11,000 lumens and 50,100 lux at 5 meters, it also just puts out a lot of light.

19 Pixels, One Flower Effect

Individual control of each RGBW pixel across all 19 sources means real pixel mapping work, not just zone-based chases. The Robe patented MCFE Multi-Colored Flower Effects engine generates sharp multi-colored spikes of light from the central 60W LED, rotating in both directions at variable speed. Pre-programmed pixel effects with color, dimming, and strobe animations are built in for fast programming when time is short.

Color Science

RGBW or CMY mixing, variable CTO from 2,700K to 8,000K, Virtual Color Wheel with 66 preset LEE swatches for fast gel matching. Tungsten lamp emulation at 2,700K, 1,000W, 1,200W, and 2,500W with red shift and thermal delay for convincing warm incandescent looks. Color rainbow effects with variable speed.

Network-Ready Control

DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, and Kling-Net all supported. 10 DMX protocol modes, control channel options from 27 to 123 channels. Internal HTP merging for sACN. Wireless CRMX from Lumen Radio available on request. Embedded Ethernet switch 10/100 Mbps with 1 in/1 out for network daisy-chaining without an external switch. EMS Electronic Motion Stabilizer reduces beam deviation caused by truss movement or vibration.

Movement and Connectivity

540-degree pan, 220-degree tilt, 16-bit resolution, automatic pan/tilt position correction. True1 power in, locking 3-pin and 5-pin XLR data in/out, RJ45 Ethernet port. 600W max consumption, 100-240V auto-ranging. 29.2 lbs.