Elation Uni Bar Single Channel Dimmer Pack: Compact DMX Dimmer for Stage and Event Lighting
The Elation Uni Bar is a compact single-channel 120V DMX dimmer pack designed for professional stage lighting applications where a lightweight, truss-mountable dimmer solution is needed close to the fixture. With 10 amps of maximum channel output and two Edison 3-prong outputs, it provides clean, controllable power to conventional fixtures directly from the truss or lighting position without requiring a dedicated dimmer rack.
Dimmer and Switch Pack Modes with Local HTP Control
The Uni Bar operates in both dimmer and switch pack modes, covering incandescent dimming and relay switching applications from a single unit. On-board HTP dimming control via the front panel dial allows local level adjustment without a DMX console, while dimmer preset and limit settings give operators precise control over output behavior. An input for an optional analog HTP dimmer controller adds further flexibility for analog-controlled environments.
DMX Control with Power Failure Memory
Single-channel DMX via 3-pin XLR in/out integrates the Uni Bar cleanly into any DMX system, and power failure memory retains the last DMX state through power interruptions for uninterrupted operation during live shows. The 3-button control panel and LCD menu display provide straightforward on-device programming and status monitoring.
At 2.4 lbs. with a standard truss clamp or coupler mounting point, the Uni Bar is practical for distributed dimming setups where running long cable runs from a central dimmer rack is not ideal.