Elation Protron 3K

TECH SPECS

VERSION:

4.0

The Elation Protron 3K LED Strobe sports the following features:

SOURCE

  • (202) CREE 3W Cool White LEDs
  • 80,000 Total Lumens
  • 50,000 Hour Average LED Life

PHOTOMETRIC DATA

  • 16,450 LUX 1,528 FC @3.3° (1m) (120° Full ON

EFFECTS

  • Electronic Dimming
  • Burst, Pulse, Lighting, Full ON*
  • *Thermally regulated output at full max 10 seconds.

CONTROL

  • 4 DMX Channel Modes (1 / 2 / 3 / 4)
  • 4 Button Control Panel
  • LCD Menu Display

CONNECTIONS

  • 3/5pin DMX In/Out
  • powerCON In/Out

DIMENSIONS

  • Length: 21.5″ (546mm)
  • Width: 6.9″ (175mm)
  • Vertical Height: 11.7″ (296mm)
  • Weight: 17.2 lbs. (7.8kg)

ELECTRICAL

  • AC 100-240V – 50/60Hz
  • 900W Max Power Consumption
  • Max Ambient Temperature 113°F (40°C)

CERTIFICATION

  • CE | cETLus | IP20

Elation Protron 3K LED Strobe available for rental. Contact us for pricing!

Elation Protron 3K: 80,000 Lumens of LED Strobe That Means It

Eighty thousand lumens from 202 CREE 3W cool white LEDs at 120 degrees. The Elation Protron 3K is not a fixture that suggests strobe, it delivers it. At 16,450 lux measured at one meter full on, it holds its own in any rig that takes strobing seriously, and at 17.2 lbs it’s light enough to hang without a structural meeting.

Effects and Output Modes

Burst, pulse, lighting, and full on modes cover the full range from subtle flicker to face-melting flash. Electronic dimming and two power modes, HIGH and LOW, give your LD room to calibrate intensity to the room rather than just blasting at full. One operational note worth knowing: thermally regulated output caps full max at 10 seconds continuous, so program accordingly if your cues run long.

Control

Four DMX channel modes covering 1, 2, 3, and 4-channel configurations handle everything from simple single-channel triggering to full independent control. LCD menu display and 4-button control panel for local setup. 3/5-pin DMX in/out, PowerCon in/out.